wire wound water filter

We are professional wire wound water filter supplier,feel free to send inquiry,we will promptly reply within 24 hours.


Description of wire wound water filter :

Wire wound filter is the deep filter element with good air tightness, made of the textile fiber, according to a specific process, tightly wound on the porous core, forming honeycomb structure with loosen exterior as  well as thick interior. The wound filter has good filtration characteristics and can  effectively remove impurities in the fluid ,such as, suspended solids, rust, granules and other impurities. Honeycomb-type wound filter is alternative products based on today's international advanced technology,  overcoming the former shortcomings, such as, large  resistance, short life, etc. With  advanced winding technology, the service life  are  double so that the frequency of replacing filter is reduce and the cost is lowered.

Features

High filtering accuracy, great flow rate, small differential pressure, high voltage-resistance, large pollutant carrying capacity, avirulent insipidity, and no secondary pollution.

1. High filtering accuracy, small differential pressure, great flow rate, large pollutant carrying capacity and long service life.

2. The filter pore size is small inside and big outside with good effect of depth filtration;

3. Filter element is made from different kinds of materials to ensure requirements for filtration of all liquids and to achieve the best filtering effect.


Principle

Wound-type filter element is made of textile fibers twined on multi-framework in a particular way. When twined, filter elements with different filter fineness can be made by control winding density. As the outer bore diameter is larger than the inner one, the filter elements have a good deep-level filtering capability.


Efficacy

Wound-type filter element can effectively remove suspended solids and particles in the liquid and the like, with small flow, small pressure loss, high residue load and long service life. It can withstand high filtration pressures. According to the nature of the liquid to be filtered, the filter elements have a variety of different materials to choose from, so that the filter element is compatible with the filtrate.


Uses

Main purposes of wound-type filter:
1 Food and beverage industry: mineral water, syrup, alcoholics, edible oil, beverage water cola drinks and so on.
2, Electronics industry: pure water, organic solvents, printed wiring board, plating and so on.
3, Petroleum and chemical industry: petroleum chemicals, pharmaceuticals, cosmetics, paints, photosensitive liquid, ink, acrylic materials, photographic processing fluids, grease and the like.
4, Industrial oil: hydraulic oil, lubricating oil, cutting oil and other various industrial oils.
5, Pharmaceutical industry: syrup, alcohol, water preparation, VC raw materials, tetracycline liquid, oxytetracycline liquid, injections and so on.
6, Others: resin lens, bearing cleaning, laser cooling water, ultrasonic cleaning fluid and plating fluid, etc.


Technical parameters
1, Filtration accuracy: 1μm, 5μm, 10μm, 20μm, 30μm, 50μm, 75μm, 100μm;
2, Outer diameter of filter element: φ60mm, φ65mm;
3, Inner diameter of filter element: φ28mm, φ30mm;
4, Polypropylene wound-type filter element can be used in organic solutions such as aqueous acid-base and chemical solution, with operating temperature ≤60 ℃
5, Absorbent cotton filter-element center rod is made of stainless steel, used in organic solvents, water, oil, alkaline solutions, beverages, pharmaceuticals , etc., with operating temperature of 120 ℃.
6, Length of filter element: 10 “, 20 “, 30 “, 40”, 50”
7, Maximum voltage: ≤0.5MPa; maximum voltage drop: 0.2MPa.
8, Maximum operating temperature: polypropylene fiber: polypropylene framework ≤60 ℃; stainless steel framework ≤80 ℃. Absorbent cotton: stainless steel framework ≤120 ℃.