microporous pleated filter
We are microporous pleated filter supplier,feel free to send inquiry,we will promptly reply within 24 hours.
Microporous pleated filter element is a kind of deep-level filter element with fixed bore diameter with ultra-fine polypropylene fiber filter material as filtering medium, and filter medium meets requirements related to FDA. Filtration fineness ranges from 0.1μm to 50μm, with unique low dropout, high throughput and long service life, it is a preferred product of pre-filtration. Full polypropylene structure has stable performance and extensive chemical compatibility.
Filter media : Polypropylene fiber membrane
Upstream and downstream support material: Polypropylene
Support frame and structural components : Polypropylene
Filter fineness: 0.1、0.2、0.45、0.65、1、3、5、10、20、30、50(μm)
Filter length: 4"、 5"、 10"、 20"、 30"、 40"
Sealing materials: silicone rubber, nitrile rubber, EPDM, Viton
Closed way : sweat soldering; effective filtration area : 0.4 ~ 0.7 m2 / 10 "
Filter diameter : 69.0 mm
Maximum operating temperature : 80 ℃, 0.28 Mpa
Maximum positive pressure : 0.42 MPa (25 ℃)
Maximum reverse pressure : 0.28 MPa (25 ℃)
Sterilization condition : 121 ℃ 30 people
Other : Special specifications diameter and various socket can be customized
Reference for selection of filter element (model of filter element socket / form of end cap )
Pharmaceutical industry: filtration of liquid, cell debris, biological products and so on
Chemical industry : filtration of organic solvents, chemical reagents , ink, plating solution and so on
Food industry: filtration of drinking water, mineral water , soft drinks, beer, wine, cider and others
Electronics industry : pre-filtering of reverse osmosis water system and deionized water system
Gas filtration: compressed air , nitrogen, carbon dioxide and others
Other industries: filtration of photosensitive resist and magnetic media, etc.
Flux of pure water reference table: 10 " filter element initial value L / min (△ P = 0.01MPa, 1 cp viscosity , 25 ℃)
Flux L / min